There are many steps on the pre-painting checklist that you want to make sure are completed before you whip out the paint brush. Prepping the walls and covering the floors are a great start, but there are other aspects of a room many homeowners don’t consider that require protection from potential paint spills! The professional Danbury, CT painters at CertaPro have put together a guide to help you prepare your furniture, windows, and hardware before you begin a painting project.
- Furniture: It can be a hassle to remove all the large furniture from a room. Some pieces may even be so large that they won’t fit through a doorway without disassembly. To save effort and time, you can simply cover your furniture and get the job done without worrying about paint damage. To protect furniture, you’re going to need large sheets of plastic covering and tape. These items can be found at any hardware store. The main idea is to cover each piece of furniture so that the possibility of paint spills and splatters is eliminated. To cover a sofa, take the plastic covering and lay it over the entire couch, making sure it reaches the bottom. To hold the plastic in place, tape around the perimeter of the couch. If it’s easier, you can tape the plastic to the floor for maximum protection.
- Windows: Paint drips on your window can look messy, and scraping dried paint off with a razor blade can cause damage to your windows. By taking the necessary precautions, accidental paint drips become less of an issue. If you have trim or a frame around your windows, start by taping off the outer edges with painters tape. This will ensure that the edge that is to be painted will have crisp, clean lines. To protect the window itself from any possible paint splatter, it’s best to use the same plastic covering used for the furniture. Cut the covering to the approximate size of each window pane and tape it down, making sure there is no space for paint to potentially drip through.
- Hardware: To protect the hardware around your home, including light switch plate covers, doorknobs, and vent grills, it’s best to remove them completely while you’re painting. During the painting process, be sure to paint as close as possible to each fixture, as painting around the approximate shape of each piece of hardware could leave you with unwanted paint gaps. If removing hardware pieces is something you would rather skip, the best thing to do is to tape around the edges of each piece with painters tape and paint very carefully!
Preparing your walls and floors for a painting project seems like the most common thing to do, but you don’t want to forget about the little details. Keep your painting project clean and organized with these paint protection tips!
